MOXA TCF-142-S-ST-T Serial to Fiber Converter Price in the Middle East | Easy World Automation

MOXA TCF-142-S-ST-T Introduction

Providing a robust solution for converting RS-232/422/485 signals into an optical fiber is a difficult task, but not for the Moxa TCF-142-S-ST-T serial to fibre converter. Known to offer an efficient and reliable way to extend communication across long distances, this industrial-grade converter ensures seamless data transmission in even the most demanding environments. Also, the ADDC (automatic data direction control) has been implemented for RS-485 communication to simplify operations by automatically managing data flow. It is possible to set the Pull High/Low Resistor to 1 kilo-ohm or 150 kilo-ohms to create a custom configuration. 

The Moxa TCF-142-S-ST-T converter comes with a single-mode ST connector for fiber optic communication to lay out high-quality, interference-free transmission. Due to the 300 ns latency that guarantees low-delay operations, the TCF-142-S-ST-T is an ideal choice for real-time data transfer in Factory Automation environments. Designed to enhance industrial edge connectivity, this product is part of the reliable Moxa TCF series, known for providing long-lasting performance in industrial settings.

Fiber Ring Operation for Expansive Network Setups

Another amazing feature that comes with the Moxa TCF-142-S-ST-T serial converter is the fiber ring operation capabilities, allowing users to create extended network topologies. To set up the ring, the Tx port of one TCF-142-S-ST-T is connected to the Rx port of the adjacent converter. Once the hardware is connected, the user can activate Ring Operation by adjusting the DIP switches that will enable seamless communication across the entire fiber ring. In this setup, when a signal is transmitted by one device, it loops around the ring until it returns to the original sender, where it is then blocked to prevent redundancy. This innovative ring topology contributes to flawless fault tolerance and supports fiber rings with a total distance of up to 100 km. It is a highly scalable solution for large industrial networks. The Moxa TCF 142 S ST T converter is well-suited for applications requiring both expansive coverage and reliable data transfer, especially in industries where continuous communication is crucial.

Wide Operating Temperature Range for Harsh Environments

One of the best features of the Moxa TCF 142 S ST T is the ability to withstand the challenging conditions commonly found in industrial environments. It is well-suited for deployment in both extreme cold and intense heat, mainly due to its wide operating temperature range of -40 to 75°C (-40 to 167°F) and an IP30-rated metal housing. This industrial serial converter supports wall mounting installation and guarantees durability, unlike its compact design. 

The ambient relative humidity tolerance of 5 to 95% (non-condensing) helps to secure optimal performance in high-humidity environments. Also, the storage temperature range, from -40 to 85°C (-40 to 185°F), establishes safe transportation and storage even in adverse conditions. These attributes make the TCF 142 S ST T an ideal choice for environments where standard devices may fail, as detailed in the Moxa TCF-142-S-ST-T datasheet.

MOXA TCF-142-S-ST-T Certifications

• 2 x RS-232/422/485 ports,1 x 100Mbps F(x) single-mode port with ST connector
• Metal body
  
• -40 to 75°C operating temperature
• Slide-in modules for the NRack System
• Supports ring and point-to-point transmission