MOXA ioLogik E2240-T Smart Ethernet Remote I/O Price in the Middle East | Easy World Automation

Menu
Your Cart

MOXA ioLogik E2240-T Smart Ethernet Remote I/O

Introduction

Moxa’s ioLogik E2200 Series Ethernet Remote I/O is a PC-based data acquisition and control device that uses proactive, event-based reporting controlling I/O devices and features the Click&Go programming interface. Unlike traditional PLCs, which are passive and must poll for data, Moxa’s ioLogik E2200 Series will, when paired with our MX-AOPC UA Server, communicate with SCADA systems using active messaging that is pushed to the server only when state changes or configured events occur. Additionally, the ioLogik E2200 features SNMP for communications and control using an NMS (Network Management System), allowing IT professionals to configure the device to push I/O status reports according to configured specifications. This report-by-exception approach, which is new to PC-based monitoring, requires far less bandwidth than traditional polling methods. 

You can also find the ioLogik E2242ioLogik E2210ioLogik E2212-T, and ioLogik E2262-T models in the ioLogik E2200 Series.

Enjoy online features to order the MOXA ioLogik E2240-T Smart Ethernet Remote I/O with a price match guarantee, and experience cost-effective delivery service, offered through our Middle East branches (UAE (Dubai), KSA (Al Khobar, Riyadh), and Oman).


Certifications

    


Features


  • 8 x AI, 2 x AO
  • 1 x RS-485 serial ports
  • 12 to 36 VDC power input
  • -40 to 75°C operating temperature
Remote I/O : Interface
Digital Input and Output No
Adjustable digital input and output No
Analog Input and Output Yes : 8 analog inputs and 2 analog outputs
Relay Output No
Thermal sensor input (RTD) No
Thermocouple input No
LAN Yes : 1 RJ-45 10/100Mbps port
Serial port Yes : 1 RS-485 terminal connection
Remote I/O : Standards and protocols
Protocols Modbus/RTU, Modbus/TCP, TCP/IP, UDP, DHCP, BOOTP, SNMP, HTTP, CGI, SNTP, SMTP
Remote I/O : General
Compatible Softwares MX-AOPC UA Server, MXIO
Remote I/O : Physical Characteristics
Standards and Certifications Safety: UL 508; EMC:EN 61000-6-2/6-4, EMI: CISPR 22, FCC Part 15B Class A; EMS: IEC 61000-4-2; ESD: Contact: 4 kV; Air: 8 kV; IEC 61000-4-3 RS:80 MHz to 1 GHz: 10 V/m1.4 GHz to 2 GHz: 3 V/m2 GHz to 2.7 GHz: 1 V/mIEC 61000-4-4 EFT: Power: 2 kV; Signal: 1 kVIEC 61000-4-5 Surge: Power: 1 kVIEC 61000-4-6 CS: 10 VIEC 61000-4-8; Green Product: RoHS, CRoHS, WEEE
Operating Temperature -40 to 75 ° C
Storage Temperature -40 to 85 ° C
Operation Humidity 5% to %95 Non-condensing
Easy World Automation’s Price Matching Policy:

As one of Moxa’s top distributors, we value quality, the pre-sales and after-sales support we provide for our customers, and the sense of satisfaction when they do business with us. Therefore, from now on at the point of the purchase at moxa.eworldme.com, as our customers, if you find a lower price of a Moxa product from any other Moxa authorized distributors or online stores, we will match your price.


How it works:

When purchasing online, you can request a price match for all the items listed on the website by communicating with our online chat or calling the number: +971 4 447 1137

Please be prepared to direct us to the competitor’s website or present the proof of offline purchase which is displaying the current lower price you would like to match. An Easy World’s sales coordinator will verify the request with our policy and match the price on the spot.

Exclusions:


- Easy World does not match pricing on open-box or refurbished products                     

- Easy World does not match pricing on the Items that other distributors have listed as clearance, closeout, or other special events