Menu
Your Cart

MOXA ioLogik E2240 Smart Ethernet Remote I/O

Introduction

Moxa’s ioLogik E2200 Series Ethernet Remote I/O is a PC-based data acquisition and control device that uses proactive, event-based reporting to control I/O devices and features the Click&Go programming interface. Unlike traditional PLCs, which are passive and must poll for data, Moxa’s ioLogik E2200 Series will, when paired with our MX-AOPC UA Server, communicate with SCADA systems using active messaging that is pushed to the server only when state changes or configured events occur. Additionally, the ioLogik E2200 features SNMP for communications and control using an NMS (Network Management System), allowing IT professionals to configure the device to push I/O status reports according to configured specifications. This report-by-exception approach, which is new to PC-based monitoring, requires far less bandwidth than traditional polling methods. 


Certifications

    


Features


  • 8 x AI, 2 x AO
  • 1 x RS-485 serial ports
  • 12 to 36 VDC power input
  • -10 to 60°C operating temperature
Remote I/O : Interface
Digital Input and Output No
Adjustable digital input and output No
Analog Input and Output Yes : 8 analog inputs and 2 analog outputs
Relay Output No
Thermal sensor input (RTD) No
Thermocouple input No
LAN Yes : 1 RJ-45 10/100Mbps port
Serial port Yes : 3 RS-485 terminal connection
Remote I/O : Standards and protocols
Protocols Modbus/TCP, TCP/IP, UDP, DHCP, BOOTP, SNMP, HTTP, CGI, SNTP, SMTP
Remote I/O : General
Compatible Softwares MX-AOPC UA Server, MXIO
Remote I/O : Physical Characteristics
Standards and Certifications Safety: UL 508; EMC:EN 61000-6-2/6-4, EMI: CISPR 22, FCC Part 15B Class A; EMS: IEC 61000-4-2; ESD: Contact: 4 kV; Air: 8 kV; IEC 61000-4-3 RS:80 MHz to 1 GHz: 10 V/m1.4 GHz to 2 GHz: 3 V/m2 GHz to 2.7 GHz: 1 V/mIEC 61000-4-4 EFT: Power: 2 kV; Signal: 1 kVIEC 61000-4-5 Surge: Power: 1 kVIEC 61000-4-6 CS: 10 VIEC 61000-4-8; Green Product: RoHS, CRoHS, WEEE
Operating Temperature -10 to 60 ° C
Storage Temperature -40 to 85 ° C
Operation Humidity 5% to %95 Non-condensing