Menu
Your Cart

MOXA AWK-3131A-JP Wireless Access Point

Introduction

The AWK-3131A 3-in-1 industrial wireless AP/bridge/client meets the growing need for faster data transmission speeds by supporting IEEE 802.11n technology with a net data rate of up to 300 Mbps. The AWK-3131A is compliant with industrial standards and approvals covering operating temperature, power input voltage, surge, ESD, and vibration. The two redundant DC power inputs increase the reliability of the power supply, and the AWK-3131A can be powered via PoE to make deployment easier. The AWK-3131A can operate on either the 2.4 or 5 GHz bands and is backwards-compatible with existing 802.11a/b/g deployments to future-proof your wireless investments.

Advanced 802.11n Industrial Wireless Solution

• 802.11a/b/g/n compliant AP/bridge/client for flexible deployment
• Software optimized for long-distance wireless communication with up to 1 km line of sight and external high-gain antenna (available only on 5 GHz)
• Supports 60 clients connected concurrently
• DFS channel support allows a wider range of 5 GHz channel selection to avoid interference from existing wireless infrastructure

Advanced Wireless Technology

• AeroMag supports error-free setup of your industrial applications’ fundamental WLAN settings
• Seamless roaming with client-based Turbo Roaming1 for < 150 ms roaming recovery time between APs (Client Mode)
• Supports AeroLink Protection for creating a redundant wireless link (< 300 ms recovery time) between APs and their clients

Industrial Ruggedness

• Integrated antenna and power isolation designed to provide 500 V insulation protection against external electrical interference
• Hazardous location wireless communication with Class I Div. II and ATEX Zone 2 certifications


Certifications

      


Feature

  • IEEE 802.11a/b/g/n AP/bridge/client support
  • Easy setup and deployment with AeroMag
  • Millisecond-level Client-based Turbo Roaming1
  • Complete redundancy with AeroLink Protection
  • Integrated antenna and power isolation
  • -25 to 60°C operating temperature
  • 5 GHz DFS channel support
Access Point : Interfaces
Modulation Type DSSS, OFDM, MIMO-OFDM
10/100/1000BaseT(X) Ports -
PoE Ports 1 x PoE Port (10/100/1000BaseT(X), RJ45 connector)
Wireless Security WEP encryption (64-bit and 128-bit), WPA/WPA2-Enterprise (IEEE 802.1X/RADIUS, TKIP, AES), WPA/WPA2-Personal
WLAN Operation Mode Access point, Client, Client-Router, Master, Slave, Sniffer
Security HTTPS/SSL, RADIUS, SSH
WLAN Standards 802.11a/b/g/n, 802.11i Wireless Security
Transmission Rates 802.11b: 1 to 11 Mbps, 802.11a/g: 6 to 54 Mbps, 802.11n: 6.5 to 300 Mbps
Digital Inputs 2
Console Port RS-232, 8-pin RJ45
Access Point : Power Requirement
Input Current 0.6 A @ 12 VDC, 0.15 A @ 48 VDC
Input Voltage 12 to 48 VDC, Redundant dual inputs, 48 VDC Power-over-Ethernet
Power Consumption 7.2 W (max.)
Reverse Polarity Protection Yes
Access Point : Physical Characteristics
Humidity 5 to 95% (non-condensing)
Dimensions Packaged 52.7 x 135 x 105 mm (2.08 x 5.32 x 4.13 in)
IP Rating IP30
Weight (PACKAGED) 0.86Kg (1.9 lb)
Standards and Certifications IEEE 802.3 for 10BaseT, IEEE 802.3u for 100BaseT(X), IEEE 802.3ab for 1000BaseT(X), IEEE 802.3af for PoE, IEEE 802.1Q for VLAN Tagging, IEEE 802.1X for authentication, IEEE 802.1D-2004 for Spanning Tree Protocol, IEEE 802.1w for Rapid Spanning Tree Protocol
Safety EN 60950-1, UL 60950-1
EMC EN 61000-6-2/-6-4
EMI CISPR 32, FCC Part 15B Class B
Housing Metal
EMS IEC 61000-4-2 ESD: Contact: 8 kV; Air: 15 kV, IEC 61000-4-3 RS: 80 MHz to 1 GHz: 3 V/m, IEC 61000-4-4 EFT: Power: 2 kV; Signal: 2 kV, IEC 61000-4-5 Surge: Power: 2 kV; Signal: 1 kV, IEC 61000-4-6 CS: 3 V, IEC 61000-4-8 PFMF
Installation DIN-rail mounting, Wall mounting (with optional kit)
Operating Temperature -25 to 60°C
Storage Temperature -40 to 85°C (-40 to 185°F)
Access Point : General
Management DHCP Server/Client, DNS, HTTP, IPv4, LLDP, Proxy ARP, SMTP, SNMPv1/v2c/v3, Syslog, TCP/IP, Telnet, UDP, VLAN, Wireless Search Utility, MXview, MXconfig
MTBF 570,854 hrs
LED Indicators PWR1, PWR2, PoE, FAULT, STATE, SIGNAL, WLAN, LAN