MOXA AWK-4131A-JP-T Wireless Access Point
AED 7,161
MOXA AWK-4131A-JP-T Introduction
The AWK-4131A IP68 outdoor industrial AP/bridge/client meets the growing need for faster data transmission speeds by supporting 802.11n technology and allowing 2X2 MIMO communication with a net data rate of up to 300 Mbps. The AWK-4131A is compliant with industrial standards and approvals covering operating temperature, power input voltage, surge, ESD, and vibration. The two redundant DC power inputs increase the reliability of the power supply, and the AWK-4131A can be powered via PoE to make deployment easier. The AWK-4131A can operate on either the 2.4 GHz or 5 GHz bands and is backward-compatible with existing 802.11a/b/g deployments to future-proof your wireless investments.
Advanced 802.11n Industrial Wireless Solution
• 802.11a/b/g/n compliant AP/bridge/client for flexible deployment
• Software optimized for long-distance wireless communication with up to 1 km line of sight and external high-gain antenna (available only on 5 GHz)
• Supports 60 clients connected concurrently
• DFS channel support allows a wider range of 5 GHz channel selection to avoid interference from existing wireless infrastructure
Advanced Wireless Technology
• AeroMag supports the error-free setup of your industrial applications’ fundamental WLAN settings
• Seamless roaming with client-based Turbo Roaming1 for < 150 ms roaming recovery time between APs (Client Mode)
• Supports AeroLink Protection for creating a redundant wireless link (< 300 ms recovery time) between APs and their clients
Industrial Ruggedness
• Integrated antenna and power isolation designed to provide 500 V insulation protection against external electrical interference
• IP68-rated metal casing for complete ingress protection for any outdoor weather
• -40 to 75°C wide operating temperature models available for smooth wireless communication in harsh environments.
Enjoy online features to order the MOXA AWK-4131A-JP-T Wireless Access Point with a price match guarantee, and experience seamless, cost-effective delivery service, offered through our Middle East branches (UAE (Dubai, Abu Dhabi), KSA (Al Khobar, Riyadh), Kuwait, Qatar, and Oman).
MOXA AWK-4131A-JP-T Certifications
MOXA AWK-4131A-JP-T Features
- 2x2 MIMO 802.11a/b/g/n AP/bridge/client
- Millisecond-level Client-based Turbo Roaming1
- Easy setup and deployment with AeroMag
- Wireless redundancy with AeroLink Protection
- Rugged industrial design with integrated antenna and power isolation
- IP68-rated weatherproof housing designed for outdoor applications and a -40 to 75°C wide operating temperature range
- Avoid wireless congestion with 5 GHz DFS channel support
Access Point : Interfaces | |
Modulation Type | DSSS, OFDM, MIMO-OFDM |
10/100/1000BaseT(X) Ports | WEP encryption (64-bit and 128-bit), WPA/WPA2-Enterprise (IEEE 802.1X/RADIUS, TKIP, AES), WPA/WPA2-Personal |
WLAN Operation Mode | Access point, Client, Client-Router, Master, Slave, Sniffer |
Security | HTTPS/SSL, RADIUS, SSH |
WLAN Standards | 802.11a/b/g/n, 802.11i Wireless Security |
Transmission Rates | 802.11b: 1 to 11 Mbps, 802.11a/g: 6 to 54 Mbps, 802.11n: 6.5 to 300 Mbps |
Digital Inputs | 1 |
Console Port | RS-232, 8-pin RJ45 |
Access Point : Power Requirement | |
Input Current | 0.64 A @ 12 VDC, 0.16 A @ 48 VDC |
Input Voltage | 12 to 48 VDC, Redundant dual inputs, 48 VDC Power-over-Ethernet |
Power Consumption | 7.68 W (max.) |
Reverse Polarity Protection | Yes |
Access Point : Physical Characteristics | |
Humidity | 5 to 95% (non-condensing) |
Dimensions Packaged | 224 x 147.7 x 66.5 mm (8.82 x 5.82 x 2.62 in) |
IP Rating | IP68 |
Weight (PACKAGED) | 1,400 g (3.09 lb) |
Standards and Certifications | IEEE 802.1D-2004 for Spanning Tree Protocol, IEEE 802.1Q for VLAN Tagging, IEEE 802.1w for Rapid Spanning Tree Protocol, IEEE 802.3 for 10BaseT, IEEE 802.3ab for 1000BaseT(X), IEEE 802.3af for PoE, IEEE 802.3u for 100BaseT(X) |
Safety | EN 60950-1, UL 60950-1 |
EMC | EN 61000-6-2/-6-4 |
EMI | CISPR 32, FCC Part 15B Class B |
Housing | Metal |
EMS | IEC 61000-4-2 ESD: Contact: 8 kV; Air: 15 kV, IEC 61000-4-3 RS: 80 MHz to 1 GHz: 10 V/m, IEC 61000-4-4 EFT: Power: 2 kV; Signal: 1 kV, IEC 61000-4-5 Surge: Power: 2 kV; Signal: 2 kV, IEC 61000-4-6 CS: 10 V, IEC 61000-4-8 PFMF |
Installation | Wall mounting (standard), DIN-rail mounting (optional), Pole mounting (optional) |
Operating Temperature | -40 to 85°C (-40 to 185°F) |
Access Point : General | |
Management | DHCP Server/Client, DNS, HTTP, IPv4, LLDP, Proxy ARP, SMTP, SNMPv1/v2c/v3, Syslog, TCP/IP, Telnet, UDP, Wireless Search Utility, VLAN, MXview, MXconfig |
MTBF | 440,764 hrs |
LED Indicators | PWR, FAULT, STATE, WLAN, LAN |
Easy World Automation’s Price Matching Policy:
As one of Moxa’s top distributors, we value quality, the pre-sales and after-sales support we provide for our customers, and the sense of satisfaction when they do business with us. Therefore, from now on at the point of purchase at moxa.eworldme.com, as our customers, if you find a lower price of a Moxa product from any other Moxa authorized distributor or online stores, we will match your price.
How it works:
When purchasing online, you can request a price match for all the items listed on the website by communicating with our online chat or calling the number: +971 4 447 1137
Please be prepared to direct us to the competitor’s website or present the proof of offline purchase which is displaying the current lower price you would like to match. An Easy World sales coordinator will verify the request with our policy and match the price on the spot.
Exclusions:
- Easy World does not match pricing on open-box or refurbished products
- Easy World does not match pricing on the Items that other distributors have listed as clearance, closeout, or other special events