
-61 %
MOXA AWK-5222-US Wireless Access Point
AED 2,479
AED 6,315
.png)


Introduction
Moxa’s wireless redundancy technology allows you to set up independent wireless connections to avoid interruptions in transmission, even if interference occurs on one of the supported frequencies. The AWK-5222 is equipped with the newest proprietary wireless redundancy technology, which has two independent RF modules and supports a greater variety of wireless configurations and applications. The redundant wireless connections increase the reliability of the entire wireless network. The AWK-5222 is compliant with industrial standards and approvals, covering operating temperature, power input voltage, surge, ESD, and vibration. The AWK5222 is rugged enough to help you establish the most robust wireless connection for critical industrial wireless applications.
You can buy the MOXA AWK-5222-US Wireless Access Point online via one of our Middle East branches (Dubai/ Oman/Saudi Arabia) and get it delivered at a low cost at a specific time.
Certifications



Features
- 2 x 10/100Mbps T(x) ports
- 2 x DIs and 1 x RS-232 Serial Console port
- IEEE 802.11a/b/g compliant
- Dual-radio design for 2.4 GHz and/or 5 GHz RF bands
- Supports client-based Turbo Roaming and redundant roaming
- -25 to 60°C operating temperature
Access Point : Interfaces | |
Spread Spectrum and Modulation | DSSS with DBPSK, DQPSK, CCK, OFDM with BPSK, QPSK, 16QAM, 64QAM, 64QAM @ 54 Mbps, 16QAM @ 24/36 Mbps, QPSK @ 12/18 Mbps, CCK @ 11/5.5 Mbps, DQPSK @ 2 Mbps, DBSK@ 1 Mbps, 802.11b: CCK @ 11/5.5 Mbps, DQPSK @ 2 Mbps, DBPSK @ 11 Mbps, 802.11a/g: 64QAM @ 54/48 Mbps, 16QAM @ 36/24 Mbps, QPSK @ 18/12 Mbps, BPSK @ 9/6 Mbps |
Operating Channels | US: 2.412 to 2.462 GHz (11 channels), 5.18 to 5.24 GHz (4 channels), EU: 2.412 to 2.472 GHz (13 channels), 5.18 to 5.24 GHz (4 channels), JP: 2.412 to 2.472 GHz (13 channels, OFDM), 2.412 to 2.484 GHz (14 channels, DSSS), 5.18 to 5.24 GHz (4 channels for W52) |
Security | SSID broadcast enable/disable, Firewall for MAC/IP/Protocol/Port-based filtering, 64-bit and 128-bit WEP encryption, WPA /WPA2 Personal and Enterprise (IEEE 802.1X/RADIUS, TKIP and AES) |
Transmission Rates | 802.11b: 1, 2, 5.5, 11 Mbps, 802.11a/g: 6, 9, 12, 18, 24, 36, 48, 54 Mbps |
Alarm Contact (digital output) | 1 relay output with the current carrying capacity of 1 A @ 24 VDC |
RJ45 Ports | 2, 10/100BaseT(X), auto-negotiation speed, F/H duplex mode, and auto MDI/MDI-X connection |
Digital Inputs | 2 electrically isolated inputs, +13 to +30 V for state “1”, +3 to -30 V for state “0”, Max. input current: 8 mA |
M12 Ports | 2, 10/100BaseT(X) auto-negotiation speed, F/H duplex mode, and auto MDI/MDI-X connection |
Console Port | RS-232 (RJ45-type) |
Access Point : Antenna | |
Antenna Type | 2 dual-band omni-directional antennas, 2 dBi, RP-SMA (male) |
Access Point : Power Requirement | |
Input Voltage | 12 to 48 VDC, redundant dual DC power inputs or 48 VDC Power-over-Ethernet (IEEE 802.3af compliant) |
Connector | 10-pin removable terminal block |
Power Consumption | 12 to 48 VDC, 800 mA (max.) |
Reverse Polarity Protection | Present |
Access Point : Physical Characteristics | |
Humidity | 5% to 95% (non-condensing) |
Dimensions Packaged | 62 x 135 x 105 mm (2.44 x 5.31 x 4.13 in) |
Weight (PACKAGED) | 1.1 kg |
Standards and Certifications | IEEE 802.11a/b/g for Wireless LAN, IEEE 802.11i for Wireless Security, IEEE 802.3 for 10BaseT(X), IEEE 802.3u for 100BaseT(X), IEEE 802.3af for Power-over-Ethernet, IEEE 802.1D for Spanning Tree Protocol, IEEE 802.1w for Rapid STP, IEEE 802.1Q for VLAN |
Safety | UL 60950-1, EN 60950-1 |
EMC | EN 301 489-1/17, FCC Part 15 Subpart B, EN 55022/55024, IEC 61000-6-2/4 |
Housing | Metal, IP30 protection |
Installation | DIN-Rail mounting (standard), Wall mounting (optional) |
Radio | EN 300 328, EN 301 893 |
Operating Temperature | -25 to 60°C (-13 to 140°F) |
Rail Traffic | EN 50155, EN 50121-1/4 |
Storage Temperature | -40 to 85°C (-40 to 185°F) |
Access Point : General | |
MTBF | 291,367 hrs |
LED Indicators | PWR1, PWR2, PoE, FAULT, STATE, WLAN1, WLAN2, 10M, 100M (TP port), LAN1, LAN2 (M12 port) |
Easy World Automation’s Price Matching Policy:
As one of Moxa’s top distributors, we value quality, the pre-sales and after-sales support we provide for our customers, and the sense of satisfaction when they do business with us. Therefore, from now on at the point of the purchase at moxa.eworldme.com, as our customers, if you find a lower price of a Moxa product from any other Moxa authorized distributors or online stores, we will match your price.
How it works:
When purchasing online, you can request a price match for all the items listed on the website by communicating with our online chat or calling the number: +971 4 447 1137
Please be prepared to direct us to the competitor’s website or present the proof of offline purchase which is displaying the current lower price you would like to match. An Easy World’s sales coordinator will verify the request with our policy and match the price on the spot.

Exclusions:
- Easy World does not match pricing on open-box or refurbished products
- Easy World does not match pricing on the Items that other distributors have listed as clearance, closeout, or other special events