Your Cart

MOXA CP-602E-I w/o Cable CANBUS PCI Express Board

MOXA CP-602E-I w/o Cable CANBUS PCI Express Board
MOXA CP-602E-I w/o Cable CANBUS PCI Express Board
  • Stock: Out Of Stock
  • Model: CP-602E-I w/o Cable
Product Views: 599
AED 1,251

Moxa’sCP-602E-I CAN (Controller Area Network) interface board supports the PCI Express interface. As a standalone CAN controller, the CP-602EI is a cost-effective solution that provides two active CAN controllers with a DB9 connector on the same board. The CP-602E-I CAN interface board uses the NXP SJA1000 and transceiver PCA82C251, which provide bus arbitration and error detection. The -40 to 85°C wide operating temperature (CP-602E-I-T only) and 2 kV isolation make the boards suitable for use in harsh industrial environments.




  • Supports CAN 2.0A and CAN 2.0B
  • Two independent CAN communication ports
  • CAN transfer rate up to 1 Mbps
  • 2 kV electrical isolation
  • LED for transmit/receive status on each port
  • Optional 120-ohm terminal resistor for CAN bus network
  • DLL library and examples included
  • Windows driver provided
CANbus Serial Boards : Serial Interface
Nomber of Ports 2
Serial Standards -
Connector -
Serial Isolation Protection 2 kV electrical isolation
CANbus Serial Boards : CAN Interface
Nomber of Ports 2
Connector DB9 male
Baudrate 10/20/50/125/250/500/800/1000 kbps, user-defined
CANbus Serial Boards : General
Standards and Certifications EMC, EMI, EMS
MTBF 4,645,502 hrs
CANbus Serial Boards : Physical Characteristics
Operating Temperature 0 to 55°C (32 to 131°F)
Storage Temperature -40 to 85°C (-40 to 185°F)
Ambient Relative Humidity 5 to 95% (non-condensing)
Dimensions 120.5 x 100 x 85 x 59.05 mm