MOXA EDF-G1002-BP-T Industrial LAN Firewall Price in the Middle East | Easy World Automation

Menu
Your Cart

MOXA EDF-G1002-BP-T Industrial LAN Firewall

                      MOXA EDF-G1002-BP-T Introduction

                      The EDF-G1002-BP Series is an industrial-grade LAN firewall with IPS and DPI functionality to protect mission-critical assets and network zones. These industrial firewalls support software-configurable Gen3 LAN bypass to achieve bump-in-the-wire installation and minimize the installation impact for industrial applications such as ITS, pump-and-treat systems in water stations, distributed control systems in oil and gas, and PLC/SCADA systems in factory automation.


                      Dynamically Prevent Malicious Cyber Threat Activity With IPS/IDS

                      The EDF-G1002-BP Series is designed to protect mission-critical assets at the OT network edge with advanced intrusion prevention and detection systems (IPS/IDS). It analyzes network traffic in the background and enables behavior monitoring and awareness of cyber activities. These firewall devices support both a “Monitor” and “Protect” mode to facilitate different OT scenarios. “Monitor” mode gives administrators full visibility of cyber threat activities on the network. If a threat is detected, administrators can easily switch to “Protect” mode to block and contain any malicious operations.


                      Industrial Deep Packet Inspection for Mission-critical Assets

                      The EDF-G1002-BP Series supports advanced Deep Packet Inspection (DPI) technology, providing awareness of industrial protocol data and allowing for granular command of control system traffic to critical controllers.


                      Virtual Patching and Intelligent Threat Protection

                      Frequent patching boosts protection against cyber threats. However, patching continues to be a major challenge in OT environments because OT applications cannot afford to interrupt operations by shutting down systems to apply patches. Virtual patching technology can help complement existing patch management processes by shielding known and unknown vulnerabilities. Virtual patching acts as an agentless emergency security tool that OT administrators and operators can use to quickly address vulnerabilities on affected OT equipment. The EDF-G1002-BP Series provides advanced protection against threats with up-to-date threat information and guards your systems against undisclosed and zero-day threats.


                      Centralized Network Security and Policy Management

                      The EDF-G1002-BP Series helps administrators and operators understand the real-time status of OT systems. When connected to Moxa’s MXsecurity centralized security management platform, administrators can manage and monitor all the intrusion prevention systems from a single space. MXsecurity provides an efficient way to monitor security assets and execute policy, firmware, configuration, and pattern updates.


                      Place your order for industrial automation products, including the MOXA EDF-G1002-BP-T Industrial LAN Firewall at a reasonable price, and explore convenient options to buy online through our website or inquire at our Middle East branches (UAE (Dubai, Abu Dhabi), KSA (Al Khobar, Riyadh), Kuwait, Qatar, and Oman). Enjoy the ease of online shopping and transactions for all your industrial needs.

                      MOXA EDF-G1002-BP-T Certifications

                            

                      MOXA EDF-G1002-BP-T Features

                      • 2 x 10/100/1000BaseT(X) Ports (RJ45 Connector)
                      • 1 x 10/100/1000BaseT(X) MGMT Ports (RJ45 Connector)
                      • With MXsecurity Support
                      • -40 to 75°C operating temperature
                      • Bump-in-the-wire installation without impacting the network
                      • Gen3 LAN Bypass for system fault tolerance
                      • Industrial-grade Intrusion Prevention/Detection System (IPS/IDS)
                      • Supports secure boot for checking system integrity
                      • Supports MXstudio for easy, visualized industrial network management
                      IPS : Interface
                      Ethernet 3 (2 x LAN ports, 1 x MGMT port) x 10/100/1000BaseT(X) Ports (RJ45 connector)
                      Buttons Reset button
                      LED Indicators PWR1, PWR2, STATE, BYPASS, USB
                      IPS : DoS and DDoS Protection
                      Technology ARP-Flood, FIN Scan, ICMP Flood, TCP Sessions Without SYN, NMAP-ID Scan, NMAP-Xmas Scan, Null Scan, SYN/FIN Scan, SYN/RST Scan, SYN-Flood, Xmas Scan
                      IPS : Firewall
                      IPS Throughput Max. 45K packets per second/500 Mbps (based on RFC 2544)
                      Latency -
                      Concurrent Connection (TCP) -
                      Deep Packet Inspection Modbus TCP, Modbus UDP, DNP3, IEC 60870-5-104, IEC 61850 MMS, EtherNet/IP, Omron FINS, Siemens S7 Comm
                      Policy Enforcement Rules -
                      ICS Protocol Filter Profiles DDoS, Ethernet protocols, ICMP, IP address, MAC address, Ports
                      IPS : Real-Time Firewall / VPN Event Log
                      Event Type Firewall events, Protocol DPI and IDS/IPS events
                      Media Syslog server, Local storage, SNMP Trap
                      IPS : Power Parameters
                      Connection Removable terminal block
                      Input Current 0.69 A (max)
                      IPS : Physical Characteristics
                      Housing Metal
                      Dimensions 35 x 125 x 100 mm (1,38 x 4.92 x 3.94 in)
                      Weight 385 g (0.85 lb)
                      Installation DIN-rail mounting, Wall mounting
                      Operating Temperature -40 to 75°C (-40 to 167°F)
                      Storage Temperature -40 to 85°C (-40 to 185°F)
                      Ambient Relative Humidity 5 to 95% (non-condensing)
                      Standards and Certifications Safety: IEC 62368-1, UL 62368-1; EMC: EN 55032/35; EMI: CISPR 32, FCC Part 15B Class A; EMS: IEC 61000-4-2 ESD: Contact: 6 kV; Air: 8 kV, IEC 61000-4-3 RS: 80 MHz to 1 GHz: 20 V/m, IEC 61000-4-4 EFT: Power: 2 kV; Signal: 2 kV, IEC 61000-4-5 Surge: Power: 2 kV; Signal: 2 kV, IEC 61000-4-6 CS: 10 V, IEC 61000-4-8 PFMF; Railway: EN 50121-4; Shock: IEC 60068-2-27; Vibration: IEC 60068-2-6
                      MTBF 2,929,641 hrs
                      Easy World Automation’s Price Matching Policy:

                      As one of Moxa’s top distributors, we value quality, the pre-sales and after-sales support we provide for our customers, and the sense of satisfaction when they do business with us. Therefore, from now on at the point of purchase at moxa.eworldme.com, as our customers, if you find a lower price of a Moxa product from any other Moxa authorized distributor or online stores, we will match your price.


                      How it works:

                      When purchasing online, you can request a price match for all the items listed on the website by communicating with our online chat or calling the number: +971 4 447 1137

                      Please be prepared to direct us to the competitor’s website or present the proof of offline purchase which is displaying the current lower price you would like to match. An Easy World sales coordinator will verify the request with our policy and match the price on the spot.

                      Exclusions:


                      - Easy World does not match pricing on open-box or refurbished products                     

                      - Easy World does not match pricing on the Items that other distributors have listed as clearance, closeout, or other special events