Menu
Your Cart

MOXA IA261-I-CE Wide Temperature Computer

Introduction

The IA260 embedded computers come with 4 RS-232/422/485 serial ports, dual Ethernet ports, 8 digital input channels, 8 digital output channels, a VGA output, 2 USB hosts, and a CompactFlash socket. The computers are housed in a compact, IP40-rated, industrial-strength aluminum case.

The IA260 computers use the Cirrus Logic EP9315 Arm9, 32-bit, 200 MHz RISC CPU. This powerful computing engine supports several useful communication functions, but will not generate too much heat. The built-in 32 MB NOR Flash ROM and 128 MB SDRAM give you enough memory to run your application software directly on the IA260.

The patented “H-Type” heat dissipation design can directly transmit heat from inside the housing to the outside, which makes the IA260 an ideal computing unit for applications that involve extremely high temperatures. With its built-in VGA output interface, the IA260 computers are suitable for use with SCADA systems in industrial applications, such as factory automation, production line process monitoring, and mining automation, that require VGA and HMI features.

The IA260 computers support RS-232/422/485, digital I/O, and have dual LAN ports, making them ideal for communication platforms in industrial applications that require network redundancy. In addition to the standard model, a wide-temperature (-40 to 75°C) model is available for use in harsh industrial automation environments.


Certifications

      


Features


  • 2 x 10/100Mbps Ethernet ports
  • 4 x RS-232/422/485 Serial ports
  • 8 x DI/DOs
  • 2 x USB 2.0 hosts
  • Cirrus Logic EP9315 Arm9 CPU, 200 MHz
  • 128MB SDRAM
  • 32MB Flash
  • Supported OS : Linux kernel version 2.6, Windows Embedded Compact 6.0
  • -10 to 60°C operating temperature
Industrial Computer : Computer
CPU Cirrus EP9315 ARM9 CPU, 200 MHz
DRAM 128 MB onboard
Flash 32 MB onboard
OS (pre-installed) Windows CE 6.0 or Linux
USB USB hosts x 2, compliant with USB 2.0 (OHCI) type A connectors
Industrial Computer : Interface
Console Port RS-232 (TxD, RxD, GND), 4-pin header output (115200, n, 8, 1)
LAN 2 auto-sensing 10/100 Mbps ports (RJ45)
Magnetic Isolation Protection 1.5 kV built-in
ESD Protection 4 kV for all signals
Industrial Computer : Display
Resolution 1024 x 768, 8 bits
Graphics Controller EP9315 internal graphics accelerator engine with TTL graphical signal support
Display Interface CRT interface for VGA output, DB15 female connector
Industrial Computer : Serial Interface
Serial Standards 2 or 4 RS-232/422/485 ports, software-selectable (DB9 male)
Industrial Computer : Digital Input
Input Channels 8, source type
Input Voltage 0 to 30 VDC
Digital Input Levels for Dry Contacts Logic level 0: Close to GND, Logic level 1: Open
Digital Input Levels for Wet Contacts Logic level 0: +3 V max., Logic level 1: +10 V to +30 V (COM to DI)
Connector Type 10-pin screw terminal block (8 points, COM, GND)
Isolation 3 kV optical isolation
Industrial Computer : Digital Output
Output Channels 8, sink type
Output Current Max. 200 mA per channel
On-State Voltage 24 VDC nominal, open collector to 30 V
Connector Type 9-pin screw terminal block (8 points, GND)
Isolation 3 kV optical isolation
Industrial Computer : Serial Communication Parameters
Data Bits 5, 6, 7, 8
Stop Bits 1, 1.5, 2
Parity Even, Odd, Space, Mark, None
Flow Control RTS/CTS, XON/XOFF, ADDC® (automatic data direction control) for RS-485
Baudrate 50 bps to 921.6 kbps
Industrial Computer : Serial Signals
RS-232 TxD, RxD, DTR, DSR, RTS, CTS, DCD, GND
RS-422 TxD+, TxD-, RxD+, RxD-, GND
RS-485-4w TxD+, TxD-, RxD+, RxD-, GND
RS-485-2w Data+, Data-, GND
Industrial Computer : LED Indicators
System Power, Ready, Storage
LAN 10M/Link x 2, 100M/Link x 2 (on connector)
Serial TxD x 4, RxD x 4, P1 to P4 for serial ports
Industrial Computer : Power Requirements
Input Voltage Redundant power input design, PWR1: 12 to 48 VDC (3-pin terminal block), PWR2: 12 to 48 VDC (power jack with thread)
Power Consumption With no load on USB ports: 5.8 W, 240 mA @ 24 VDC, 480 mA @ 12 VDC, With full load on USB ports: 11 W, 450 mA @ 24 VDC, 900 mA @ 12 VDC
Industrial Computer : General
Alert Tools Built-in buzzer and RTC (real-time clock)
Automatic Reboot Trigger Built-in WDT (watchdog timer)
MTBF 118,752 hrs
Storage Expansion CompactFlash slot
Speed 10 kbps to 1 Mbps
Industrial Computer : Physical Characteristics
Dimensions 60 x 115 x 152 mm (2.36 x 4.53 x 5.98 in)
Housing Aluminum, industrial vertical form factor
Operating temperature -10 to 60°C (14 to 140°F)
Storage Temperature -20 to 80°C (-4 to 176°F)
Relative humidity 5 to 95% (non-condensing)
EMC EN 61000-6-4, EN 61000-3-2 Class D, EN 61000-3-3, EN 61000-6-2, FCC Part 15 Subpart B Class A
Weight 950 g
Anti-Vibration 5 g rms @ IEC-68-2-34, random wave, 5-500 Hz, 1 hr per axis
Safety UL 60950-1, CSA C22.2 No. 60950-1-03, EN 60950-1
Green Product RoHS, CRoHS, WEEE
Anti-Shock 50 g @ IEC-68-2-27, half sine wave, 11 ms
Mounting DIN rail, wall