
MOXA MGate 5118 Industrial Ethernet Gateways
AED 2,031
.png)






Introduction
The MGate 5118 industrial protocol gateways support the SAE J1939 protocol, which is based on the CAN bus (Controller Area Network). SAE J1939 is used to implement communication and diagnostics among vehicle components, diesel engine generators, and compression engines, and is suitable for the heavy-duty truck industry and backup power systems. It is now common to use an engine control unit (ECU) to control these kinds of devices, and more and more applications are using PLCs for process automation to monitor the status of J1939 devices connected behind the ECU.
The MGate 5118 gateways support the Modbus RTU/ASCII/TCP, EtherNet/IP, and PROFINET protocols to support most PLC applications. Devices that support the J1939 protocol can be monitored and controlled by PLCs and SCADA systems that use the Modbus RTU/ASCII/TCP, EtherNet/IP, and PROFINET protocols. With the MGate 5118, you can use the same gateway in a variety of PLC environments.
You can buy the MOXA MGate 5118 Industrial Ethernet Gateways, which is applicable in Oil & Gas industry, online via one of our Middle East branches (Dubai/ Oman/Saudi Arabia) and get it delivered at a low cost at a specific time.
Certifications
Features
- CAN-J1939 to Modbus/PROFINET/EtherNet/IP gateway
- 2 x 10/100Mbps T(x) ports and 1 x RS-232/422/485 port
- 12 to 48 VDC input power
- Metal body
- 0 to 60°C operating temperature
industrial gateway : Ethernet Interface | |
Number of Ports | 2 (1 IP address, supports Ethernet cascading) |
Speed | 10/100 Mbps, Auto MDI/MDIX |
Connector | 8-pin RJ45 |
Magnetic Isolation Protection | 1.5 kV (built-in) |
Protocols | Modbus TCP (Client/Server), PROFINET (I/O device), EtherNet/IP (Scanner/Adapter) |
industrial gateway : Serial port specifications | |
RS-232 Signals | TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND |
RS-422 Signals | Tx+, Tx-, Rx+, Rx-, GND |
RS-485-4w Signals | Tx+, Tx-, Rx+, Rx-, GND |
RS-485-2w Signals | Data+, Data-, GND |
industrial gateway : Industrial Protocols | |
Protocols | SAE J1939, Modbus RTU/ASCII/TCP, PROFINET, EtherNet/IP |
Protocol Conversion | J1939 to Modbus RTU/ASCII (Master/Slave), J1939 to Modbus TCP (Client/Server), J1939 to EtherNet/IP (Scanner/Adapter), J1939 to PROFINET (I/O Device) |
industrial gateway : CAN-J1939 Serial Interface | |
Protocols | SAE J1939 |
Number of Ports | 1 |
Connectors | 6-pin terminal block |
Terminator | 120 Ω |
Isolation | 2 kv (built-in) |
Data Rate | 250 kbps and 500 kbps |
industrial gateway : Serial Communication Parameters | |
Data Bits | 8 |
Stop Bits | 1, 2 |
Parity | Even, Odd, Space, Mark, None |
Flow Control | RTS/CTS, RTS Toggle |
Baudrate | 50 bps to 921.6 kbps |
industrial gateway : Software | |
Configuration Options | Web console |
Utility | Device Search Utility (DSU) for Windows 95, 98, ME, NT, 2000, Windows XP, Server 2003, Vista, Server 2008 (x86/x64), Windows Server 2008 R2, Windows 7/8/8.1/10 (x86/x64), Windows Server 2012 (x64), Windows 2012 R2 |
Support | MXview, MXconfig, IEC 62443-4-2 |
Network Protocols | TCP/IP, UDP, HTTP, SMTP, NTP, DNS, DHCP Client, SNMP (v1, v2, v3), MIB-II, ARP, Telnet |
industrial gateway : Modbus Serial Interface | |
Protocols | Modbus RTU/ASCII (Master/Slave) |
Number of Ports | 1 |
Serial Standards | RS-232/422/485, software selectable |
Connectors | DB9 male |
Pull High/Low Resistor for RS-485 | 1 kΩ, 150 kΩ |
Terminator for RS-485 | 120 Ω |
Isolation | 2 kV (built-in) |
industrial gateway : General | |
MTBF | 727,873 hrs |
industrial gateway : Power Requirements | |
Input Current | 416 mA @ 12 VDC, 195 mA @ 24 VDC; 110 mA @ 48 VDC |
Input Voltage | 12 to 48 VDC |
Power Connector | Terminal block |
industrial gateway : Physical Characteristics | |
Dimensions | 45.8 x 105 x 134 mm (1.8 x 4.13 x 5.28 in) |
Housing | Metal, IP30 |
Operating Temperature | 0 to 60°C (32 to 140°F) |
Weight | 589 g (1.30 lb) |
Storage Temperature | -40 to 85°C (-40 to 185°F) |
Ambient Relative Humidity | 5 to 95% (non-condensing) |
Vibration | IEC 60068-2-6, IEC 60068-2-64 |
Shock | IEC 60068-2-27 |
Drop | IEC 60068-2-32 |
Safety | EN 60950-1(LVD), UL 61010-2-201 |
Hazardous Location | Class I Division 2, ATEX, IECEx |
EMC | EN 61000-6-2/6-4 |
EMI | CISPR 22, FCC Part 15B Class B |
EMS | IEC 61000-4-2 ESD: Contact: 4 kV; Air: 8 kV, IEC 61000-4-3 RS: 80 MHz to 1 GHz: 10 V/m, IEC 61000-4-4 EFT: Power: 2 kV; Signal: 1 kV, IEC 61000-4-5 Surge: Power 1 kV; Signal: 1 kV, IEC 61000-4-6 CS: 10 V, IEC 61000-4-8 PFMF: 10 A/m |
Storage Card Slot | 1 microSD (SDHC) card slot; supports up to 32 GB |
Easy World Automation’s Price Matching Policy:
As one of Moxa’s top distributors, we value quality, the pre-sales and after-sales support we provide for our customers, and the sense of satisfaction when they do business with us. Therefore, from now on at the point of the purchase at moxa.eworldme.com, as our customers, if you find a lower price of a Moxa product from any other Moxa authorized distributors or online stores, we will match your price.
How it works:
When purchasing online, you can request a price match for all the items listed on the website by communicating with our online chat or calling the number: +971 4 447 1137
Please be prepared to direct us to the competitor’s website or present the proof of offline purchase which is displaying the current lower price you would like to match. An Easy World’s sales coordinator will verify the request with our policy and match the price on the spot.

Exclusions:
- Easy World does not match pricing on open-box or refurbished products
- Easy World does not match pricing on the Items that other distributors have listed as clearance, closeout, or other special events