MOXA W406-T-CE wireless Embedded Computer Price in the Middle East | Easy World Automation

Menu
Your Cart
0
0
MOXA W406-T-CE wireless Embedded Computer
End of Life -100 %

This product is unavailable for sale and has been discontinued. Please refer to the replacement series:  UC-8100 Series


MOXA W406-T-CE Introduction

The W406 is an embedded Linux or WinCE computer that features 2 software-selectable RS-232/422/485 ports, 1 Ethernet port, and quad-band GSM/GPRS/EDGE 900/1800/850/1900 MHz for cellular communication. It also comes with an SD socket, USB host, and 4 digital input and 4 digital output channels, making it the ideal computer for a variety of industrial applications such as data acquisition, data processing, protocol conversion, and remote device control and monitoring via wireless communication. The W406 comes pre-installed with either Linux or WinCE 6.0 and offers a reliable and powerful computing platform for industrial environments.

MOXA W406-T-CE Certifications

     

MOXA W406-T-CE Features

  • Cirrus Logic EP9302 32-bit ARM9 processor
  • On-board 32 MB RAM (maximum 64 MB) 
  • Built-in 16 MB Flash (maximum 32 MB)
  • Built-in GSM/GPRS/EDGE cellular communication
  • GSM 850/900/1800/1900 MHz supported
  • Two software-selectable RS-232/422/485 serial ports
  • 50 bps to 921.6 Kbps, non-standard baud rates supported
  • 10/100M Ethernet for network redundancy 
  • Robust, fanless design


Buy the MOXA W406-T-CE wireless Embedded Computer online via one of our Middle East branches (UAE (Dubai, Abu Dhabi), KSA (Al Khobar, Riyadh), Kuwait, Qatar, and Oman) and get it delivered at a low cost at a specific time.

Industrial Computer : Computer
CPU Cirrus Logic EP9302 ARM9 32-bit RISC CPU, 200 MHz
DRAM 32 MB
Flash 16 MB
OS (pre-installed) WinCE 6.0/Embedded Linux with MMU support
USB USB 2.0 compliant hosts x 1, type A connector
Industrial Computer : Interface
Console Port RS-232 interface (TxD, RxD, GND), with 4-pin pin header output
LAN 1 auto-sensing 10/100 Mbps port (RJ45)
Magnetic Isolation Protection 1.5 kV built-in
Serial Standards 2 RS-232/422/485 ports, software-selectable (DB9 male)
ESD Protection 15 KV ESD protection for all signals
Industrial Computer : Digital Input
Input Channels 4, source type
Input Voltage 0 to 30 VDC at 5 kHz
Digital Input Levels for Dry Contacts Logic level 0: Close to GND, Logic level 1: Open
Digital Input Levels for Wet Contacts Logic level 0: +3 V max. , Logic level 1: +10 V to +30 V (COM to DI)
Connector Type 10-pin screw terminal block (8 points, COM, GND)
Isolation 3 KV optical isolation
Industrial Computer : Digital Output
Output Channels 4, sink type
Output Current Max. 200 mA per channel
On-State Voltage 24 VDC nominal, open collector to 30 V
Connector Type 9-pin screw terminal block
Isolation 3 KV optical isolation
Industrial Computer : Serial Communication Parameters
Data Bits 5, 6, 7, 8
Stop Bits 1, 1.5, 2
Parity None, Even, Odd, Space, Mark
Flow Control RTS/CTS, XON/XOFF, ADDCâ„¢ (automatic data direction control) for RS-485
Baudrate 50 bps to 921.6 Kbps (non-standard baudrates supported)
Industrial Computer : Serial Signals
RS-232 TxD, RxD, DTR, DSR, RTS, CTS, DCD, GND
RS-422 TxD+, TxD-, RxD+, RxD-, GND
RS-485-4w TxD+, TxD-, RxD+, RxD-, GND
RS-485-2w Data+, Data-, GND
Industrial Computer : LED Indicators
System Ready, Storage
LAN 10M/Link, 100M/Link (on the connector)
Serial TxD, RxD
Industrial Computer : Power Requirements
Input Voltage 12 to 48 VDC
Power Consumption With no load on USB ports: 7.2 W, 300 mA @ 24 VDC, 600 mA @ 12 VDC, With full load on USB ports: 14.4 W, 600 mA @ 24 VDC, 1200 mA @ 12 VDC
Industrial Computer : General
Storage Expansion SD slot
Industrial Computer : Physical Characteristics
Dimensions 144 x 119 x 40 mm (5.7 x 4.7 x 1.6 in)
Housing Aluminum (1 mm)
Operating temperature -40 to 70°C (-40 to 158°F)
Storage Temperature -40 to 85°C (-40 to 185°F)
EMC FCC: Part 15, Part 24/24
Weight 1 kg
Anti-Vibration 2 g @ IEC-68-2-6, sine wave, 5-500 Hz, 1 Oct./min, 1 hr/axis
Safety LVD: EN60950-1
Humidity 5 to 95% RH
Anti-Shock 6 g @ IEC-68-2-27, half-sine wave, 11 ms (when attached to DIN-rail kit), 20 g @ IEC-68-2-27, half-sine wave, 11 ms (when attached to optional wall mount kit)
Mounting DIN-rail, wall (requires optional wall mount kit)
Easy World Automation’s Price Matching Policy:

As one of Moxa’s top distributors, we value quality, the pre-sales and after-sales support we provide for our customers, and the sense of satisfaction when they do business with us. Therefore, from now on at the point of purchase at moxa.eworldme.com, as our customers, if you find a lower price of a Moxa product from any other Moxa authorized distributor or online stores, we will match your price.


How it works:

When purchasing online, you can request a price match for all the items listed on the website by communicating with our online chat or calling the number: +971 4 447 1137

Please be prepared to direct us to the competitor’s website or present the proof of offline purchase which is displaying the current lower price you would like to match. An Easy World sales coordinator will verify the request with our policy and match the price on the spot.

Exclusions:


- Easy World does not match pricing on open-box or refurbished products                     

- Easy World does not match pricing on the Items that other distributors have listed as clearance, closeout, or other special events