Menu
Your Cart

MOXA CB-602I w/o Cable CANBUS Module

Introduction

Moxa’s CB-602I CAN (Controller Area Network) interface boards support the PC/104-Plus interface. Optional DB9 and DB25 connection cables are available for connecting to CAN interface devices. The CB-602I CAN interface boards use the NXP SJA1000 and PCA82C251 transceiver, which provide bus arbitration and error detection. The -40 to 85°C wide operating temperature (CB-602I-T only) and 2 kV isolation make the boards suitable for use in harsh industrial environments.


Certifications

  


Features


  • Supports CAN 2.0A and CAN 2.0B
  • Two independent CAN communication ports
  • CAN transfer rate up to 1 Mbps
  • 2 kV electrical isolation
  • LED for transmit/receive status on each port
  • Optional 120-ohm terminal resistor for CAN bus network
  • DLL library and examples included
  • Windows drivers provided
CANbus Serial Boards : Serial Interface
Nomber of Ports 8 x Max. No. of Boards per PC
Serial Standards -
Connector Optional DB9 and DB25 connection cables are available for connecting to CAN interface devices
Serial Isolation Protection 2 kV
CANbus Serial Boards : CAN Interface
Nomber of Ports 2
Connector 20-pin box header
Baudrate 10/20/50/125/250/500/800/1000 kbps, user-defined
CANbus Serial Boards : General
Standards and Certifications EMC, EMI, EMS
MTBF 248,563 hrs
CANbus Serial Boards : Physical Characteristics
Operating Temperature 0 to 55°C (32 to 131°F)
Storage Temperature -40 to 85°C (-40 to 185°F)
Ambient Relative Humidity 5 to 95% (non-condensing)
Dimensions 95.9 x 90.2 mm