Menu
Your Cart

MOXA CP-602U-I-T w/o Cable CANBUS UPCI Board

MOXA CP-602U-I-T w/o Cable CANBUS UPCI Board
MOXA CP-602U-I-T w/o Cable CANBUS UPCI Board
  • Stock: Out Of Stock
  • Model: CP-602U-I-T w/o Cable
Product Views: 247
AED 1,288
Introduction

Moxa’s CP-602U-I CAN (Controller Area Network) interface board supports the Universal PCI interface. As a standalone CAN controller, the CP602U-I is a cost-effective solution that provides two active CAN controllers with a DB9 connector on the same board. The CP-602U-I CAN interface board uses the NXP SJA1000 and transceiver PCA82C251, which provide bus arbitration and error detection. The -40 to 85°C wide operating temperature (CP-602U-I-T only) and 2 kV isolation make the boards suitable for use in harsh industrial environments.


Certifications

  


Features


  • Supports CAN 2.0A and CAN 2.0B
  • Two independent CAN communication ports
  • CAN transfer rate up to 1 Mbps
  • 2 kV electrical isolation
  • LED for transmit/receive status on each port
  • Optional 120-ohm terminal resistor for CAN bus network
  • DLL library and examples included
  • Windows driver provided
  • -40 to 85°C Operating Temperature
CANbus Serial Boards : Serial Interface
Nomber of Ports 2
Serial Standards -
Connector -
Serial Isolation Protection 2 kV
CANbus Serial Boards : CAN Interface
Nomber of Ports 2 x CAN 2.0 A/B
Connector DB9 male
Baudrate 10/20/50/125/250/500/800/1000 kbps, user-defined
CANbus Serial Boards : General
Standards and Certifications EMC, EMI, EMS
MTBF 1,989,990 hrs
CANbus Serial Boards : Physical Characteristics
Operating Temperature -40 to 85°C (-40 to 185°F)
Storage Temperature -40 to 85°C (-40 to 185°F)
Ambient Relative Humidity 5 to 95% (non-condensing)
Dimensions 120.5 x 120 x 106.3 x 80 mm