MOXA CSM-G200-1221 slide-in Ethernet-to-Fiber Media Converter Price in the Middle East | Easy World Automation

Menu
Your Cart

MOXA CSM-G200-1221 slide-in Ethernet-to-Fiber Media Converter

MOXA CSM-G200-1221 slide-in Ethernet-to-Fiber Media Converter
MOXA CSM-G200-1221 slide-in Ethernet-to-Fiber Media Converter
  • Stock: Out Of Stock
  • Model: CSM-G200-1221
Product Views: 842
AED 946

MOXA CSM-G200-1221 Introduction

The CSM-200 slide-in Ethernet-to-fiber media converters are designed for the NRack System™. The modules provide media conversion from 10/ 100BaseT(X) to 100BaseFX (SC/ST connectors) and can be installed in any NRack System™ chassis.

You can also find the CSM-200-1214 and CSM-200-1218 models in the CSM-200 Series.

Enjoy online features to order the MOXA CSM-G200-1221 slide-in Ethernet-to-Fiber Media Converters with a price match guarantee, and experience seamless, cost-effective delivery service, offered through our Middle East branches (UAE (Dubai, Abu Dhabi), KSA (Al Khobar, Riyadh), Kuwait, Qatar, and Oman).

MOXA CSM-G200-1221 Certifications

    

MOXA CSM-G200-1221 Features

  • 1 x 10/100Mbps T(x) port and 1 x 100Mbps F(x) multi-mode port with SC connector
  • Fiber Module Type: SFP
  • 12 VDC input power
  • 0 to 55°C operating temperature
  • LFP (Link Fault Pass-Through) and FEF (Far End Fault)
  • Two different operation modes: store-and-forward and pass-through
  • Auto-negotiation
  • Plug and play
  • Hot-swappable
eth to fiber : Interface
10/100Mb RJ45 (Megabit) Ports Yes : 1 Port
10/100/1000Mb RJ45 (Gigabit) Ports No
100Mb Fiber optic multi mode (Megabit) Ports No
100Mb Fiber optic single mode (Megabit) Ports No
1000Mb SFP Fiber optic (Gigabit) Ports No
M12 port No
Alert Output No
eth to fiber : Standards and protocols
Protocols and work standards _
eth to fiber : General
Maximum cable length for data transfer 5Km with multi mode fiber optic cable
MTBF 1,579,447 hrs
eth to fiber : Power Requirements
Power consumed 185 mA @ 12 VDC
Type of power input -
POE Support No
Protection against overflow No
eth to fiber : LED Indicators
LNK/ACT No
eth to fiber : Buttons
DIP Switch No
eth to fiber : Physical Characteristics
Standards and Certifications EMC: EN 55032/35; EMI: CISPR 32, FCC Part 15B Class A; EMS: IEC 61000-4-2 ESD: Contact: 4 kV; Air: 8 kV, IEC 61000-4-3 RS: 80 MHz to 1 GHz: 3 V/m, IEC 61000-4-4 EFT: Power: 1 kV; Signal: 0.5 kV, IEC 61000-4-5 Surge: Power: 1 kV; Signal: 1 kV, IEC 61000-4-6 CS: 150 kHz to 80 MHz: 3 V/m; Signal: 3 V/m, IEC 61000-4-8 PFMF: 30 A/m; Environmental Testing: IEC 60068-2-1, IEC 60068-2-14, IEC 60068-2-2, IEC 60068-2-3; Vibration: IEC 60068-2-6
Housing -
Dimensions 86.8 x 124.3 x 21 mm (3.42 x 4.89 x 0.83 in)
Weight 140 g (0.31 lb)
Operating Temperature 0 to 55°C (32 to 131°F)
Storage Temperature -40 to 85°C (-40 to 185°F)
Operation Humidity 5 to 95% (non-condensing)
Installation can be installed in any NRack System™ chassis
Easy World Automation’s Price Matching Policy:

As one of Moxa’s top distributors, we value quality, the pre-sales and after-sales support we provide for our customers, and the sense of satisfaction when they do business with us. Therefore, from now on at the point of purchase at moxa.eworldme.com, as our customers, if you find a lower price of a Moxa product from any other Moxa authorized distributor or online stores, we will match your price.


How it works:

When purchasing online, you can request a price match for all the items listed on the website by communicating with our online chat or calling the number: +971 4 447 1137

Please be prepared to direct us to the competitor’s website or present the proof of offline purchase which is displaying the current lower price you would like to match. An Easy World sales coordinator will verify the request with our policy and match the price on the spot.

Exclusions:


- Easy World does not match pricing on open-box or refurbished products                     

- Easy World does not match pricing on the Items that other distributors have listed as clearance, closeout, or other special events