MOXA EDR-G9010-VPN-2MGSFP-HV-T Introduction
The Moxa EDR-G9010-VPN-2MGSFP-HV-T industrial secure router is a robust addition to the Moxa EDR-G9010 series, offering advanced network protection in demanding industrial environments. This EDR-G9010-VPN-2MGSFP-HV-T features 8 GbE copper ports and 2 GbE SFP slots, designed to enhance the reliability of Moxa industrial network infrastructure. With its industrial-grade Intrusion Prevention/Detection System (IPS/IDS) and MXsecurity management software for OT security visualization, the Moxa EDR-G9010-VPN-2MGSFP-HV-T secure router is ideal for industries such as Railway Transportation, Road Transportation, Marine, Oil and Gas, Factory Automation, Water and Wastewater, Mining, and Power Utility. The router's Mean Time Between Failures (MTBF) is an impressive 509,714 hours, ensuring long-term reliability. Implement the Moxa EDR-G9010-VPN-2MGSFP-HV-T for secure and reliable networking and data protection.
Wide Operating Temperature Range Designed for Extreme Conditions
The Moxa EDR-G9010-VPN-2MGSFP-HV-T router is built to withstand harsh environmental conditions. As a result of its rugged design, it is considered to be a trusted Moxa industrial secure router. It comes with a metal housing and supports DIN-rail mounting (DNV-certified) and optional wall mounting. This EDR G9010 VPN 2MGSFP HV T model operates within a wide operating temperature range of -40 to 75°C (-40 to 158°F) and can be stored at temperatures as low as -40°C and as high as 85°C (-40 to 185°F). The router also handles ambient relative humidity levels from 5% to 95% (non-condensing), suitable for extreme industrial environments.
Versatile High Voltage Input for Flexible Operations
Designed to operate in a variety of industrial power environments, the EDR-G9010-VPN-2MGSFP-HV-T router supports a versatile Input Voltage of 120/240 VDC/VAC. This Moxa router features redundant dual inputs and operates within a voltage range of 88 to 300 VDC and 90 to 264 VAC for consistent performance. Additionally, the Moxa EDR G9010 VPN 2MGSFP HV T router has reverse polarity protection and consumes minimal power. This router is an excellent choice for those who are looking for a device with high-voltage endurance capabilities.
Comprehensive Support of Firewall/NAT/VPN/Router/Switch
The Moxa EDR-G9010-VPN-2MGSFP-HV-T firewall is a highly integrated industrial multi-port secure router that combines firewall/NAT/VPN and managed Layer 2 switch functionalities into one all-in-one firewall/NAT/VPN/router/switch. This industrial VPN router offers secure remote access via VPN and leverages Deep Packet Inspection (DPI) technology to examine industrial protocol data. Network setup is simplified with Network Address Translation (NAT), which protects internal networks from unauthorized external access. For more details on its advanced features, refer to the Moxa EDR-G9010-VPN-2MGSFP-HV-T datasheet.
MOXA EDR-G9010-VPN-2MGSFP-HV-T Certifications
The Moxa EDR-G9010-VPN-2MGSFP-HV-T industrial secure router is designed to ensure reliable performance and safety in critical applications by meeting rigorous industry standards. This router is certified with EMC standards for electromagnetic compatibility, EMI (Electromagnetic Interference), and EMS (Electromagnetic Susceptibility), which confirm it operates reliably in environments with high electromagnetic noise. The router also meets rigorous shock, vibration, and freefall standards suitable for industrial applications.
The EDR G9010 VPN 2MGSFP HV T router holds the EN 50121-6 certification, which is crucial for railway applications, guaranteeing that it can handle the electromagnetic environment typical of railway systems. Additionally, the NEMA TS4 certification confirms the router’s suitability for transportation environments, where it must endure extreme temperatures and vibrations. The Moxa EDR G9010 VPN 2MGSFP HV T is also certified under IEEE 1613 and IEC 61850-3 Edition 2.2 standards, which are critical for reliability in power substation environments. Such features safeguard the router against high electrical interference and harsh operating conditions. These comprehensive certifications highlight the Moxa secure router's industrial-grade reliability and its capacity to protect critical networks.
MOXA EDR-G9010-VPN-2MGSFP-HV-T Features
- All-in-one firewall/NAT/VPN/router/switch with 10 GbE ports
- Secure remote access tunnel with VPN
- The stateful firewall protects critical assets
- Inspect industrial protocols with PacketGuard technology
- Easy network setup with Network Address Translation (NAT)
- RSTP/Turbo Ring redundant protocol enhances network redundancy
- Security features based on IEC 62443/NERC CIP
- Supports secure boot for checking system integrity
- Check firewall settings with the intelligent Setting Check feature
-40 to 75°C operating temperature
You can also find the EDR-G9010-VPN-2MGSFP model in the EDR-G9010 Series.
You can purchase the MOXA EDR-G9010-VPN-2MGSFP-HV-T Industrial Secure Router, tailor-made for industrial Automation at a competitive price, and simplify your buying process by placing an order through the website or inquire at our Middle East branches (UAE (Dubai, Abu Dhabi), KSA (Al Khobar, Riyadh), Kuwait, Qatar, and Oman). Our dedicated team is always ready to assist you.
Router : Interface | |
Ethernet Ports | 8 x 10/100/1000BaseT(X) Ports (RJ45 connector) |
Serial Ports | No |
Input/Output Channels | Digital Input Channels: +13 to +30 V for state 1, -30 to +3 V for state 0, Max. input current: 8 mA |
Router : LED Interface | |
LED Indicators | PWR1, PWR2, STATE, MSTR/H.TC, CPLR/T.TC, VRRP/HA, VPN, USB |
Router : General | |
Supported Protocols | Back Pressure Flow Control, DDNS, DHCP Server/Client, Web Console (HTTP/HTTPS), LLDP, QoS/CoS/ToS, SNMPv1/v2c/v3, Telnet, TFTP, HTTPS, SSH, RSTP, STP, Turbo Ring v2, NTP Server/Client, SNTP, OSPF, RIPV1/V2, Static Route, IGMP v1/v2/v3, DDoS, Ethernet protocols, ICMP, DNP, EtherCAT, EtherNet/IP, FOUNDATION Fieldbus, FTP, HTTP, IEC 60870-104, IPsec, L2TP, LonWorks, Modbus TCP, PPTP, PROFINET, RADIUS, SSH, Telnet |
MTBF | 509,714 hrs |
Router : Power Requirements | |
Input Voltage | 120/240 VDC/VAC |
Input Current | 0.28 A @ 120 VAC, 0.18 A @ 240 VAC, 0.15 A @ 120 VDC, 0.08 A @ 240 VDC |
Operating Voltage | 88 to 300 VDC, 90 to 264 VAC |
Overload Current Protection | - |
Reverse Polarity Protection | Supported |
Power Connector | Removable terminal block |
Router : Physical Characteristics | |
Housing | Metal |
IP Rating | - |
Installation | DIN-rail mounting, Wall mounting (with optional kit) |
Ambient Relative Humidity | 5 to 95% (non-condensing) |
Standards and Certifications | Safety, EMC, EMI, EMS, IEEE 1613, IEC 61850-3 Edition 2.0, Shock, Freefall, Vibration, Industrial Cybersecurity, EN 50121-4, NEMA TS2, IEC 60945, DNV, Hazardous Locations: (ATEX, Class I Division 2) |