MOXA ICF-1150-S-ST-T-IEX Serial to Fiber Converter
AED 2,572
MOXA ICF-1150-S-ST-T-IEX Introduction
The ICF-1150 serial-to-fiber converters transfer RS-232/RS-422/RS-485 signals to optical fiber ports to enhance transmission distance. When an ICF-1150 device receives data from any serial port, it sends the data through the optical fiber ports. These products not only support single-mode and multi-mode fiber for different transmission distances, but models with isolation protection are also available to enhance noise immunity. The ICF1150 products feature three-way communication and a rotating switch to set the pull high/low resistor for onsite installation.
You can also find the ICF-1150-S-SC, ICF-1150I-M-ST-T, and ICF-1150-M-SC-T models in the ICF-1150 Series.
Discover top-notch industrial solutions, and buy MOXA ICF-1150-S-ST-T-IEX Serial to Fiber Converter with confidence online through our website at reasonable price or connect with our sales experts by inquiring in the Middle East (UAE (Dubai, Abu Dhabi), KSA (Al Khobar, Riyadh), Kuwait, Qatar, and Oman). Our commitment to quality and customer satisfaction remains unparalleled.
MOXA ICF-1150-S-ST-T-IEX Certifications
MOXA ICF-1150-S-ST-T-IEX Features
- Hazardous Locations: UL/cUL Class I Division 2 Groups A/B/C/D, ATEX Zone 2, IECEx
- 1 x RS-232/422/485 Serial port and 1 x 100Mbps F(x) single-mode port with ST connector
- 12 to 48 VDC input power
- Metal body
- -40 to 85°C operating temperature
converter : Converter specifications | |
Data transfer speed | 0.05Kbps to 921.6Kbps |
Maximum data transmission distance | 40Km on fiber |
Minimum output power converter | -5dBm |
Sensitivity to receiving information | -25dBm |
Wavelength | Typical (nm): 1310nm |
converter : Power Requirements | |
Maximum power consumption | - |
Power Consumption (Output Adapter) | 264 mA @ 12 to 48 VDC |
Power Input Plugin ( Redundant ) | No |
converter : Standards and protocols | |
Point-to-point topology | No |
Ring topology | No |
RS-232 Signals | TxD, RxD, GND |
RS-422 Signals | TxD+, TxD-, RxD+, RxD-, GND |
RS-485-2w Signals | Data+, Data-, GND |
converter : Interface | |
10/100Mb RJ45 (Megabit) Ports | No |
100Mb Fiber optic single mode (Megabit) Ports | Yes : 1 x ST Port |
10/100/1000Mb (Gigabit) POE Ports | No |
100Mb Fiber optic multi mode (Megabit) Ports | No |
10/100/1000Mb RJ45 (Gigabit) Ports | No |
1000Mb SFP Fiber optic (Gigabit) Ports | No |
100Mb SFP Fiber optic (Megabit) Ports | No |
Number of 10/100Mb PoE port | No |
USB | No |
DSL | No |
Serial port | Yes: 1 x RS-232/422/485 Port |
Other ports | No |
converter : General | |
Fan / Fanless | Fanless |
MTBF | 792,085 hour |
Require cable diameter | G.652 |
converter : Physical Characteristics | |
Dimensions | 30.3 x 70 x 115 mm (1.19 x 2.76 x 4.53 in) |
Housing | Metal |
Installation | Din-rail |
Isolation | No |
Operating Temperature | -40 to 85 ° C |
Operation Humidity | 5% to %95 non-condensing |
Protection against excessive consumption | - |
Protection against reverse flow | - |
Standards and Certifications | Safety: UL 508; Hazardous Location: UL/cUL Class I Division 2 Groups A/B/C/D, ATEX, Zone 2 EEx nC IIC, IECEx; EMC: EN 55032/24; EMI: CISPR 32, FCC Part 15B Class B; EMS: EN 61000-4-2 (ESD): Contact: 8 kV; Air: 15 kV, EN 61000-4-3 (RS): 80 MHz to 1 GHz: 3 V/m, EN 61000-4-4 (EFT): Power: 4 kV; Signal: 2 kV, EN 61000-4-5 (Surge): Power: 4 kV; Signal: 0.5 kV, EN 61000-4-6 (CS): 150 kHz to 80 MHz: 3 V/m, EN 61000-4-8 (PFMF); Green Product: RoHS, CRoHS, WEEE; Freefall: IEC 60068-2-32; Water and Dust Proof: IP30 |
Storage Temperature | -40 to 85 ° C |
Weight | 0.33Kg |
converter : LED Indicators | |
LED Per Port | Yes |
Power | Yes |
converter : Package Checklist | |
Hardware installation guide | Yes |
Power adapter | No |
Power cable | No |
Easy World Automation’s Price Matching Policy:
As one of Moxa’s top distributors, we value quality, the pre-sales and after-sales support we provide for our customers, and the sense of satisfaction when they do business with us. Therefore, from now on at the point of purchase at moxa.eworldme.com, as our customers, if you find a lower price of a Moxa product from any other Moxa authorized distributor or online stores, we will match your price.
How it works:
When purchasing online, you can request a price match for all the items listed on the website by communicating with our online chat or calling the number: +971 4 447 1137
Please be prepared to direct us to the competitor’s website or present the proof of offline purchase which is displaying the current lower price you would like to match. An Easy World sales coordinator will verify the request with our policy and match the price on the spot.
Exclusions:
- Easy World does not match pricing on open-box or refurbished products
- Easy World does not match pricing on the Items that other distributors have listed as clearance, closeout, or other special events