Menu
Your Cart

MOXA IMC-101-S-SC Ethernet to Fiber Converter

Introduction

The IMC-101 industrial media converters provide industrial-grade media conversion between 10/100BaseT(X) and 100BaseFX (SC/ST connectors). The IMC-101 converters’ reliable industrial design is excellent for keeping your industrial automation applications running continuously, and each IMC-101 converter comes with a relay output warning alarm to help prevent damage and loss. The IMC-101 media converters are designed for harsh industrial environments, such as in hazardous locations (Class 1, Division 2/Zone 2, IECEx, DNV, and GL Certification), and comply with FCC, UL, and CE standards. Models in the IMC-101 Series support an operating temperature from 0 to 60°C, and an extended operating temperature from -40 to 75°C. All IMC-101 converters are subjected to a 100% burn-in test.

You can also find the IMC-101-M-SC-TIMC-101-S-SC-TIMC-101-M-STIMC-101-M-ST-T models in the IMC-101 series.


Certifications

    


Features


  • 1 x 10/100Mbps T(x) port and 1 x 100Mbps F(x) single-mode port with SC connector
  • 12 to 45 VDC input power
  • Metal body
  • 0 to 60°C operating temperature
eth to fiber : Interface
10/100Mb RJ45 (Megabit) Ports Yes : 1 Port
10/100/1000Mb RJ45 (Gigabit) Ports No
100Mb Fiber optic multi mode (Megabit) Ports No
100Mb Fiber optic single mode (Megabit) Ports Yes : 1 SC Port
1000Mb Fiber optic single mode (Gigabit) Ports No
1000Mb SFP Fiber optic (Gigabit) Ports No
M12 port No
Alert Output Yes
eth to fiber : Standards and protocols
Protocols and work standards IEEE 802.3, IEEE 802.3u
eth to fiber : General
Maximum cable length for data transfer 40Km with single mode fiber optic cable
MTBF 401,000 hour
eth to fiber : Power Requirements
Power consumed 12V DC to 45V DC, 0.3A
Type of power input Power Input Jack
POE Support No
Protection against reverse voltage Yes
Protection against overflow Yes
eth to fiber : LED Indicators
LNK/ACT No
Power Yes
eth to fiber : Buttons
DIP Switch 100BaseFX Full/Half duplex selection, port break alarm mask
eth to fiber : Physical Characteristics
Standards and Certifications FCC Class A , UL, CE, UL/cUL Class I Division 2 Groups A/B/C/D, ATEX Zone2 Ex nA nC op is IIC T4 Gc, IECEx Ex nA nC IIC T4 Gc , : EN 55022/24 , CISPR 22, EN 61000-4-2 (ESD), EN 61000-4-3 (RS), EN 61000-4-4 (EFT), EN 61000-4-5 (Surge), EN 61000-4-6 (CS), EN 61000-4-8 (PFMF) , EN 61000-4-11 , RoHS, CRoHS, WEEE , IEC 60068-2-27, IEC 60068-2-32, IEC 60068-2-6, DNV, GL
Housing Metal
Dimensions 53.6x135x105mm
Weight 0.63Kg
Operating Temperature 0 to 60 ° C
Storage Temperature -40 to 85 ° C
Operation Humidity 5% to %95 non-condensing
Installation Din-rail and wall mount