MOXA IMC-101-S-SC-T Introduction
The MOXA IMC-101-S-SC-T Ethernet to Fiber Converter is an essential component for enhancing industrial network infrastructure. This industrial media converter transforms Ethernet signals to fiber optic and extends the reach and reliability of network connections. As a number of the Moxa IMC-101 series, the IMC-101-S-SC-T has been created to perform in harsh environmental conditions. The MOXA IMC-101-S-SC-T Ethernet Converter supports both single-mode and multi-mode fiber optic cables, offering flexibility to meet variants of networking needs in industries like Oil and Gas, Factory Automation, and IP Surveillance. The IMC-101-S-SC-T converter has been equipped with network management capabilities including Link Fault Pass-Through (LFP) and Far-End Fault (FEF) detection, which help in maintaining network integrity by identifying and addressing any connectivity issues. By integrating the MOXA IMC-101-S-SC-T converter into your network, you can enhance the performance, security, and reliability of your industrial Ethernet infrastructure.
Rugged and Reliable Design
The MOXA IMC 101 S SC T converter has been built to withstand the most challenging industrial environments. Its rugged design ensures reliable operation across a wide temperature range of -40°C to 75°C. The metal construction guarantees long-term performance and stability, which is essential for industrial applications. The IMC 101 S SC T magnetic isolation technology safeguards against electrical noise, a common challenge in industrial automation. This ensures clear and reliable data transmission. Furthermore, the converter comes equipped with a relay output warning alarm that can be configured to notify you of potential issues.
Advanced Network Management
The IMC-101-S-SC-T media converter’s network management such as LFP and FEF detection enables quick identification and resolution of network issues, minimizing downtime and ensuring continuous network operation. These advanced management capabilities are vital for maintaining robust and efficient industrial networks.
Versatile Fiber Connectivity
The MOXA IMC-101-S-SC-T Ethernet to Fiber Converter offers unmatched versatility by supporting both single-mode and multi-mode fiber optic cables. This flexibility allows for integration into various network setups with different distance and bandwidth requirements. The converter's ability to extend Ethernet networks over fiber optics enhances network performance and security, addressing the limitations of copper-based connections.
By incorporating these features, the MOXA IMC-101-S-SC-T Ethernet to Fiber Converter stands out as a reliable and efficient solution for modern industrial network infrastructure and ensures robust, secure, and high-performance communication in demanding environments.
You can also find the IMC-101-S-SC, IMC-101-M-SC-T, and IMC-101-S-SC-IEX models in the IMC-101 Series.
Please place your order for industrial automation products, including the MOXA IMC-101-S-SC-T Ethernet to Fiber Converter at a reasonable price, and explore convenient options to buy online through our website or inquire at our Middle East branches (UAE (Dubai, Abu Dhabi), KSA (Al Khobar, Riyadh), Kuwait, Qatar, and Oman). Enjoy the ease of online shopping and transactions for all your industrial needs.
MOXA IMC-101-S-SC-T Certifications
The IMC 101 S SC T converter has been certified to meet
industrial standards. It has obtained certifications for compliance with
vibration resistance, safety, and hazardous locations such as Class 1, Division
2, and Zone 2. These certifications emphasize its suitability for deployment in
challenging environments. the MOXA IMC-101-S-SC-T Ethernet to Fiber Converter
datasheet provides comprehensive documentation for its use in industrial
networking solutions.
MOXA IMC-101-S-SC-T Features
- 1 x 10/100Mbps T(x) port and 1 x 100Mbps F(x) single-mode port with SC connector
- 12 to 45 VDC input power
- Metal body
- -40 to 75°C operating temperature
eth to fiber : Interface | |
10/100Mb RJ45 (Megabit) Ports | Yes : 1 Port |
10/100/1000Mb RJ45 (Gigabit) Ports | No |
100Mb Fiber optic multi mode (Megabit) Ports | No |
100Mb Fiber optic single mode (Megabit) Ports | Yes : 1 SC Port |
1000Mb Fiber optic single mode (Gigabit) Ports | No |
1000Mb SFP Fiber optic (Gigabit) Ports | No |
M12 port | No |
Alert Output | Yes |
eth to fiber : Standards and protocols | |
Protocols and work standards | IEEE 802.3, IEEE 802.3u |
eth to fiber : General | |
Maximum cable length for data transfer | 40Km with single mode fiber optic cable |
MTBF | 401,000 hour |
eth to fiber : Power Requirements | |
Power consumed | 12V DC to 45V DC, 0.3A |
Type of power input | Power Input Jack |
POE Support | No |
Protection against reverse voltage | Yes |
Protection against overflow | Yes |
eth to fiber : LED Indicators | |
LNK/ACT | No |
Power | Yes |
eth to fiber : Buttons | |
DIP Switch | 100BaseFX Full/Half duplex selection, port break alarm mask |
eth to fiber : Physical Characteristics | |
Standards and Certifications | FCC Class A , UL, CE, UL/cUL Class I Division 2 Groups A/B/C/D, ATEX Zone2 Ex nA nC op is IIC T4 Gc, IECEx Ex nA nC IIC T4 Gc , : EN 55022/24 , CISPR 22, EN 61000-4-2 (ESD), EN 61000-4-3 (RS), EN 61000-4-4 (EFT), EN 61000-4-5 (Surge), EN 61000-4-6 (CS), EN 61000-4-8 (PFMF) , EN 61000-4-11 , RoHS, CRoHS, WEEE , IEC 60068-2-27, IEC 60068-2-32, IEC 60068-2-6, DNV, GL |
Housing | Metal |
Dimensions | 53.6x135x105mm |
Weight | 0.63Kg |
Operating Temperature | -40 to 75 ° C |
Storage Temperature | -40 to 85 ° C |
Operation Humidity | 5% to %95 non-condensing |
Installation | Din-rail and wall mount |