MOXA CSM-400-1214 slide-in Ethernet-to-Fiber Media Converter
AED 920
MOXA CSM-400-1214 Introduction
The CSM-400 Series consists of slide-in Ethernet-to-fiber managed media converters for the NRack System™. The modules provide media conversion from 10/100BaseT(X) to 100BaseFX (with SC/ST connectors), and can be installed in any NRack System™ chassis. The CSM-400 modules support LFP and FEF for easily tracing network link failures and support store-and-forward and pass-through modes, 802.3AM OAM for remote management and monitoring, as well as WDM-type fiber modules to reduce fiber cable cost.
Explore the wide variety of industrial automation products we have for sale at lower prices. Choose and buy MOXA CSM-400-1214 slide-in Ethernet-to-Fiber Media Converter, the ideal solutions that meet your specific needs. Our branches in the Middle East (UAE (Dubai, Abu Dhabi), KSA (Al Khobar, Riyadh), Kuwait, Qatar, and Oman) are strategically located to provide efficient support for all your purchasing requirements.
MOXA CSM-400-1214 Certifications
MOXA CSM-400-1214 Features
- 1 x 10/100Mbps T(x) port and 1 x 100Mbps F(x) multi-mode port with SC connector
- 12 VDC input power
- -20 to 55°C operating temperature
- LFP (Link Fault Pass-Through) and FEF (Far End Fault)
- Supports store-and-forward mode and pass-through mode
- Auto-negotiation
- Supports IEEE 802.3AH OAM protocol
- Plug and play
- Hot-swappable
- IP-based remote management
eth to fiber : Interface | |
10/100Mb RJ45 (Megabit) Ports | Yes : 1 Port |
10/100/1000Mb RJ45 (Gigabit) Ports | No |
100Mb Fiber optic multi mode (Megabit) Ports | Yes : 1 SC Port |
100Mb Fiber optic single mode (Megabit) Ports | No |
1000Mb SFP Fiber optic (Gigabit) Ports | No |
M12 port | No |
Alert Output | No |
eth to fiber : Standards and protocols | |
Protocols and work standards | IEEE 802.3u for 100BaseT(X) and 100BaseFX |
eth to fiber : General | |
Maximum cable length for data transfer | 5Km with multi mode fiber optic cable |
MTBF | 1,454,560 hrs |
eth to fiber : Power Requirements | |
Power consumed | 220 mA @ 12 VDC |
Type of power input | - |
Protection against overflow | No |
eth to fiber : LED Indicators | |
LNK/ACT | No |
eth to fiber : Buttons | |
DIP Switch | No |
eth to fiber : Physical Characteristics | |
Standards and Certifications | EMC, EMI, EMS, Safety, Vibration |
Housing | - |
Dimensions | 86.8 x 124.3 x 21 mm (3.42 x 4.89 x 0.83 in) |
Weight | 0.115kg |
Operating Temperature | -20 to 55°C (-4 to 131°F) |
Storage Temperature | -40 to 85°C (-40 to 185°F) |
Operation Humidity | 5 to 95% (non-condensing) |
Installation | - |
Easy World Automation’s Price Matching Policy:
As one of Moxa’s top distributors, we value quality, the pre-sales and after-sales support we provide for our customers, and the sense of satisfaction when they do business with us. Therefore, from now on at the point of purchase at moxa.eworldme.com, as our customers, if you find a lower price of a Moxa product from any other Moxa authorized distributor or online stores, we will match your price.
How it works:
When purchasing online, you can request a price match for all the items listed on the website by communicating with our online chat or calling the number: +971 4 447 1137
Please be prepared to direct us to the competitor’s website or present the proof of offline purchase which is displaying the current lower price you would like to match. An Easy World sales coordinator will verify the request with our policy and match the price on the spot.
Exclusions:
- Easy World does not match pricing on open-box or refurbished products
- Easy World does not match pricing on the Items that other distributors have listed as clearance, closeout, or other special events